Свойства K-INLINE-DRG AG IG O SEKUNDAERENTLU
- Область температур: 0 °C to +60 °C
- Рабочее давление: max. 18 bar
- Корпус: Zinc
- Корпус: Zinc
- остальные детали: Brass, NBR, stainless steel
- Дополнительная информация: Toleranz Druck ± 0,3 bar bei 10 l/min
| Название | Резьба | A | SW | B | Действия |
|---|---|---|---|---|---|
| K-07250275 | G 1/4 | 34,0 | 17 | 52,0 mm | |
| K-07250276 | G 1/4 | 34,0 | 17 | 52,0 mm | |
| K-07250277 | G 1/4 | 34,0 | 17 | 52,0 mm | |
| K-07250278 | G 1/4 | 34,0 | 17 | 52,0 mm | |
| K-07250279 | G 1/4 | 34,0 | 17 | 52,0 mm | |
| K-07250280 | G 1/4 | 34,0 | 17 | 52,0 mm | |
| K-07250281 | G 1/4 | 34,0 | 17 | 52,0 mm | |
| K-07250282 | G 1/4 | 34,0 | 17 | 52,0 mm |
Прочие данные только по запросу.
This single-acting diaphragm regulator can be installed in any pneumatic system. Since the pressure is preset in the factory and cannot be altered, the product is also tamper-proof. We recommend mounting the regulator directly on the tool to make sure the correct pressure is applied. In this case, the tool is never stressed by the higher pressure of the supply system and is protected against pressure fluctuations in hoses, pipes, etc. Energy efficiency and economic efficiency can be achieved by using an inline pressure regulator.
Pressure tolerance ± 0.3 bar at 10 l/min